| Step | | Procedure & Parts & Tools |
| 1 |
|
Lay machine on
its right side. Remove the 5
screws from the belt
cover with a 12mm
socket and ratchet
wrench.
| Ratchet-Socket metric 12mm |
|
|
| 2 |
|
Remove the belt
cover and brush pulley
cover.
|
| 3 |
|
Roll the brush
and belt by hand,
until belt rolls off the
end of the motor
pulley.
|
| 5 |
|
Slide out the brush pulley using a flat tip screwdriver. Reverse the entire process to install the belt
| Screwdriver-flat tip |
|
|